Installation instructions for NetFlow Auditor and supported Operating Systems

Config: Set UDP to receive NetFlow, IPFIX, sFlow, jflow ..

UDP ports that Netflow Auditor will use to listen for Netflow streams can be configured in "NetFlow UDP Receiving UDP Port" screen.



By default the "Collector ID" is set to the localhost IP address of the NetFlow Auditor Collector ie "127.0.0.1". NetFlow Auditor supports multi-collectors working in a cluster with one common database server.

The localhost refers to the central "Database Server" where multiple "Helper collectors" are used and each individual collector of the cluster must be configured to the Network Interface Card IP Address.

NetFlow Auditor supports NetFlow, IPFIX and sFlow.

NetFlow Enterprise Collector is only available on Linux Platform.

The defined UDP port must be opened on the collectors local firewall and any firewalls between router and collectors.

The "Listening IP" is the bound IP address of UDP port on collector. "Listening IP"=127.0.0.1 will bind any netcard ip addresses with the defined UDP port on the collector.