Comprehensive user manual for NetFlow Auditor Standard and Enterprise Editions.

Diagnostics: 4. Diagnostics screen deciphered

The record of a recurring Baseline or Threshold alert are shown in the Diagnostics screen. The Baseline may have been manually created or created automatically by NetFlow Auditor or during the Alert Template setup process.

The Diagnostics screen has a number of Components:

  • (1) Filter Tab
  • (2) Refresh toggle
  • (3) Ticket Number
  • (4) Age
  • (5) Ticket Term
  • (6) Status
  • (7) Baselined Item (Usually Device/Interface)
  • (8) Absolute Route and AS Path
  • (9) Baseline Alert ID
  • (10) Meter
  • (11) General Diagnostic
  • (12) Dominant
  • (13) Sub-Dominant
  • (14) Repeat Offenders
  • (15) Checkpoint: Dominant Profile
  • (16) Checkpoint: Sub-Dominant Profile
  • (17) Owner

Clicking on the red links of the Diagnostics screen will open a new tab with the parameters displayed in the mouseover.

Clicking on the blue links of the Diagnostics screen will filter the diagnostics



During the creation of a new Baseline/Threshold Alert an Alert Category is assigned.

Usually the Alert category is "Auto" and this will tell NetFlow Auditor to run diagnostics on an Alert. The Alert Templates are assigned an "Auto" alert category automatically

Image


Diagnostics: 1. Introduction
Diagnostics: 2. Setup baseline learning
Diagnostics: 3. Monitoring Alerts and Tickets
Diagnostics: 4. Diagnostics screen deciphered
Diagnostics: 5. SNMP Traps and Email Notifications