This area will help fast track you in planning, setting up and managing NetFlow in your environment. NetFlow is an embedded instrumentation within Cisco IOS Software to characterize network operation.

Network specialists of various levels within an organization need to be able to report on traffic traversing sites, key links and data centers without deploying probes. They use NetFlow Auditor powered by DigiToll’s unique methods of collection to capture and analyze every NetFlow record with aggregation options and small footprint real-time and long-term storage. From Telco to SME you will recognize the superior reliability and performance of the DigiToll NetFlow Auditing solutions, as well as the management benefits offered.

Configure sFlow - D-Link xStack DGS-3600 Series

D-Link xStack DGS-3600 Series User Manual

The sFlow commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters).

    enable sflow

    disable sflow

    create sflow analyzer_server <value 1-4> owner <name 16> {timeout [<sec 1-2000000 | infinite] collectoraddress <NetFlow-Auditor-ipaddr> | collectorport <udp_port_number 1-65535> | maxdatagramsize <value 300-1400>}

    note: udp_port_number can be 1-65535. Use 6343 for easy NetFlow Auditor default setup

    config sflow analyzer_server <value 1-4> {timeout [<sec 1-2000000 | infinite] collectoraddress <NetFlow-Auditor-ipaddr> | collectorPort <udp_port_number 6343> | maxdatagramsize <value 300-1400>}

    delete sflow analyzer_server <value 1-4>

    show sflow analyzer_server

    create sflow counter_poller ports [<portlist> | all] analyzer_server_id <value 1-4> {internal [disable | <sec 20-120>]}

    config sflow counter_poller ports [<portlist> | all] interval [disable | <sec 20-120>]

    delete sflow counter_poller ports [<portlist> | all]

    show sflow counter_poller

    create sflow flow_sampler ports [<portlist> | all] analyzer_server_id <value 1-4> {rate <value 0-65535> | maxheadersize <value 18-256>

    config sflow flow_sampler ports [<portlist> | all] {rate <value 0-65535> | maxheadersize <value 18-256>

    delete sflow flow_sampler ports [<portlist> | all]

    show sflow flow_sampler

    show sflow