cysight.ai

D-Link xStack DGS-3600 Series User Manual

The sFlow commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters).

• enable sflow
  
  disable sflow
  
  create sflow analyzer_server <value 1-4> owner <name 16> {timeout [<sec 1-2000000 | infinite] collectoraddress <NetFlow-Auditor-ipaddr> | collectorport <udp_port_number 1-65535> | maxdatagramsize <value 300-1400>}
  
  note: udp_port_number can be 1-65535. Use 6343 for easy CySight default setup
  
  config sflow analyzer_server <value 1-4> {timeout [<sec 1-2000000 | infinite] collectoraddress <NetFlow-Auditor-ipaddr> | collectorPort <udp_port_number 6343> | maxdatagramsize <value 300-1400>}
  
  delete sflow analyzer_server <value 1-4>
  
  show sflow analyzer_server
  
  create sflow counter_poller ports [<portlist> | all] analyzer_server_id <value 1-4> {internal [disable | <sec 20-120>]}
  
  config sflow counter_poller ports [<portlist> | all] interval [disable | <sec 20-120>]
  
  delete sflow counter_poller ports [<portlist> | all]
  
  show sflow counter_poller
  
  create sflow flow_sampler ports [<portlist> | all] analyzer_server_id <value 1-4> {rate <value 0-65535> | maxheadersize <value 18-256>
  
  config sflow flow_sampler ports [<portlist> | all] {rate <value 0-65535> | maxheadersize <value 18-256>
  
  delete sflow flow_sampler ports [<portlist> | all]
  
  show sflow flow_sampler
  
  show sflow